Loading... Please wait...

BodyBilt High Back Chair

  • BodyBilt High Back
  • BodyBilt High Back Chair blue
  • BodyBilt High Back Chair taupe
Price:
$1,189.00
Weight:
40.00 LBS
Shipping:
Calculated at checkout
Quantity:




Product Description

The BodyBilt 3500 Series is one of the most customizable ergonomic chairs in the world. In ergonomics, the saying goes you want your chair to fit your body, and not force your body to fit the chair. With over 10 different customizable features, you can tailor the BodyBilt 3500 to fit your body better than you could tailor a shirt.

BodyBilt 3500 Series - 3502 / 3507 / 3508 Options

Mechanism

When ordering your new BodyBilt 3500 Series Ergonomic Chair, you’ll find it is available in three mechanism options: J Mech, E Mech, and R Mech:

  • The J Mechanism is by far, the most popular and represents 90% of our BodyBilt orders. When rocking or adjusting the seat tilt of the chair, the J Mech has a pivot point that is centered underneath the seat. With a centered pivot point, this means you can tilt backward by the same amount you can tilt forward, e.g., tilts back 7 degrees, tilts forward 7 degrees.
  • The J Mechanism w/ Seat Slider option allows you to "slide" the seat closer to or further away from the backrest.
  • The E Mechanism has a pivot point that is more forward in the chair, closer to behind your knees. Because of its forward pivot point, the chair tilts more backward than it tilts forward, e.g., tilts back 13 degrees, tilts forward 7 degrees. We recommend the E Mech for people who like more rocking action in their chair.
  • The R Mechanism works with a synchro-tilt mechanism. This means that the backrest and seat bottom tilt back together at a pre-determined 3 to 1 ratio - for every 3 degrees you lean back on the backrest, the seat bottom tilts up by 1 degree. If you tilted the backrest by 6 degrees, the seat bottom would come up by 2 degrees, and so on. In comparison, the backrest and seat bottom for the J Mech and E Mech tilt at 1 to 1 ratio. Simply put, the R Mech offers greater reclining action when you rock.

We note however that because of the synchro-tilt action on the R Mech, you cannot adjust seat tilt and backrest tilt independently like you could with the J Mech or E Mech. The R Mech’s synchro-tilt joins seat and backrest tilt together so they cannot be de-coupled.

Seat Contour

  • 07 Seat Bottom - This is a moderately contoured seat and ideal for 95% of the population. Moderate contours improve distribution of your weight over the surface area of the seat, while minimizing pressure points.
  • 08 Seat Bottom - This is a flat contoured seat, which has less contour than the 07 Seat Bottom.
  • 02 Seat Bottom - This is a deeply contoured seat, which has more contour than the 07 Seat Bottom. Pronounced pommel in front of the groin area makes crossing your legs uncomfortable. Recommended for individuals who need a seat that encourages a static position.

Seat Cushion

  • Standard Seat Cushion - Multi-layered, high density foam.
  • S’port Seat Cushion (+$27.00) - Added layer of memory foam on top of standard seat cushion foam.

Back Cushion

  • Standard Back Cushion - Multi-layered, high density foam.
  • S’port Back Cushion (+$27.00) - Added layer of memory foam on top of standard back cushion foam.
  • S’port Ridge Back Cushion (+$81.00) - S’port Back Cushion with added ridge in the center that follows your spine. If you run your hand across your back, you can feel how your spine is indented compared to the rest of your back. The S’port Ridge is designed to accommodate this natural indentation; encourages you to roll your shoulders back a little while you sit.

Lumbar Support

  • No Additonal Lumber Support - Chair without additional lumbar support.
  • S’port Foam Lumbar (+$39.00) - S’port Memory Foam inserted in the backrest at the lumbar region. Non-adjustable.
  • Air Lumbar (+$54.00) - Air bladder inserted in the backrest at the lumbar region. You can pump the air bladder to increase the amount of support and firmness. Quick release valve deflates air bladder at the touch of a button.

Headrest

  • No Headrest (-$90.00) - Chair without the headrest; deducts $90.00 from price
  • Standard Headrest - Standard, height adjustable headrest
  • Fore-Aft Neckroll - In addition to height adjustment, you can also adjust the depth - bring this headrest closer to your head, or push it further away. More adjustability makes this option more popular with our customers.

Armrests

  • Standard Armrests - Excellent adjustable armrests; so good we can’t believe they come standard! Three-way adjustability includes: height adjustment, width adjustment, and rotational adjustment (example: rotate armrests inward for better forearm support while typing).
  • Pivot Armrests (+$139.00) - The standard armrests with an added pivot mechanism that allows for an extra 2" of adjustment. Great for people who like to have their arms more centered in front of their body instead of out in a wider restsing position.
  • Pivot Armrests with S'ports Pads (+$199.00) - This offers the greater adjustability of the pivot armrests with the addition of a 12" memory foam S'port pad across the length of each armrest for the ultimate arm comfort and support.

Seat Height

  • Standard Cylinder - Recommended for people 5’2” to 6’2” with a seat height range of 16.5” to 22.0”
  • Short Cylinder - Recommended for people 5’1” or shorter with a seat height range of 14.3” to 17.0”
  • Tall Cylinder (+$99.00) - Recommended for people 6’3” or taller with a seat height range of 21.5” to 29.0”

Base Color

  • Standard Black Base - Standard 26” five-star base.
  • Polished Aluminum Base (+$44.00) - 26” five-star base in polished aluminum adds style to your new ergonomic chair.
  • Mahogany Base (+$97.00) - 26" five-star base in rich mahogany for a classic and stately look.

Casters

  • Carpet Casters - These casters (the wheels on the bottom of your chair) are ideal for carpet use, but can also be used on hard floors.
  • Hard Floor Casters - Ideal for hard floors, but can also be used on carpet. These hard floor casters are slightly softer and have tighter rolling tension (vs. Carpet Casters) to help keep the chair from rolling around too much on hard floors.
  • Stationary Glides - If you prefer not to have wheeled casters, the stationary glides provide a nice option for keeping the chair in a fixed position.
  • Chrome Casters (+$25.00) - A perfect match to go with the polished aluminum base option.

Fabric - Grade I: Standard

BodyBilt provides a great selection of standard fabrics to choose from. These durable fabrics come in a variety of colors. We can customize your chair in the standard fabric colors available below.

 

Fabric - Grade II: Comfortek Premium Fabrics (+$136.00)

These Comfortek fabrics are our most popular. Comfortek fabrics have a little stretch in them and will feel softer than standard fabrics, especially when used in conjunction with memory foam. Comfortek fabrics are more breathable as well, making your chair feel a bit cooler.

Fabric - Grade III: Leather (+$756.00)

BodyBilt uses 100% genuine leather which has a light protective finish to guard against spills. This premium Scandanavian leather has a very soft, luxurious feel.


BodyBilt 3500 Series - 3502 / 3507 / 3508 Specifications

Backrest Height 22.0 inches
Backrest Height Adjustment Range 4.0 inches (backrest goes higher/lower)
Backrest Width 21.5 inches
Backrest Angle Adjustment Range 15 degrees
Extra Lumbar Support Yes (optional)
Adjustable Lumbar Yes
Headrest Height Adjustment Range 5.0 inches (headrest goes higher/lower)
Headrest Depth Adjustment Range 3.7 inches (Fore-Aft Neckroll only)
Armrest Pivot Adjustment Range 360 degrees
Armrest Height Adjustment Range 4.5 inches
Armrest Width Adjustment Range 6.0 inches
Seat Depth 21.0 inches
Seat Depth Adjustment Range 3.0 inches (seat slides forward/backward)
Seat Width 19.0 inches
Seat Height (standard cylinder) 16.5 inches - 22.0 inches
Seat Height (short cylinder) 14.3 inches - 17.0 inches
Seat Height (tall cylinder) 21.5 inches - 29.0 inches
Base Diameter 26.0 inches
Casters Carpet or Hard Floor options available

BodyBilt 3500 Series - 3502 / 3507 / 3508 Features

Features

BodyBilt 3500 Series - 3502 / 3507 / 3508 Features

  • Made in USA
  • High Back
  • Adjustable backrest height
  • Adjustable backrest angle
  • Adjustable armrest height, width, and pivot angle
  • Adjustable seat height
  • Adjustable seat depth (distance of seat from the backrest)
  • Adjustable seat tilt angle
  • Adjustable lumbar support
  • Adjustable headrest
  • Contoured seat cushions increases contact area to reduce pressure points.
  • Seat bottoms available in mild, moderate, or deeply contoured.

Video




Downloads

Product Sheet


Article

To better appreciate how you can customize BodyBilt’s products, it’s helpful to understand how BodyBilt names their products. BodyBilt uses a 4 digit numbering system to name their chairs. The first two numbers represent the type of backrest, and the last two numbers represent the seat bottom. So for example - if you wanted BodyBilt’s High Back Chair (the 35 back) with a moderately contoured seat bottom (the 07 seat bottom), your chair would become the BodyBilt 3507. If you wanted the High Back with a flat countered seat (the 08 seat bottom), you’re looking at a 3508.

And yes - there are different backrests available too. For example, if you wanted the 3500 Series back without the headrest, that would be the BodyBilt 2500 Series. So a high back chair without the headrest (the 25 back) with a moderately contoured seat (the 07 seat bottom) would be called the BodyBilt 2507.

Read Full Article +

Back to Top ↑

Product Videos

bidetsPLUS.com - How to Install a Bidet (02:29)
http://www.bidetsPLUS.com- Scene 1 -All parts required to install your bidet will be included with your shipment. The first thing to do is remove your existing seat. Then youll notice two holes here and this is where the bidets mounting bracket goes. Place the mounting bracket on top of these two holes, and then place the metal guide rails in the mounting bracket like so.Then insert the bolts that came with the bracket in the guide rails and thru the holes.Secure the bottom by fastening the nuts. - Scene 2 -Once the bracket is securely mounted, the bidet slides on and attaches to the toilet.- Scene 3 -To show how to connect the water supply, we placed the water tank here on the ground. This is just for demonstration though, as you shouldnt actually remove the tank during installation.Behind your toilet youll find a valve similar to the one were holding, with a hose connecting to the bottom of the water tank. First, turn off the water intake by closing the valve. This stops the water, preventing it from passing on thru to the hose.Then unscrew the hose. Again, make sure youve closed the valve first or else youre gonna get wet!Now, find the T-connection which comes included, and fasten it to the valve. Its called a T-connection because its shaped like the letter T and allows the water to run two different ways one way will be back to your water tank, and the other way will be to the bidet.Reconnect the hose to your water tank by securing it to the top end of the T-connection. Secure a second hose to the other opening. And attach the other end of this hose to the bidet.As mentioned, all parts required for installation will be included with your shipment including hoses, the T-connection, the mounting bracket, nuts and bolts.Use a wrench to tighten all connections. Turn the water supply back on. And check for leaks.
  • bidetsPLUS.com...
    http://www.bidetsPLUS.com- Scene 1 -All parts required to inst...

Warranty Information

BodyBilt Manufacturer's Limited Warranty:

• Ten year warranty on mechanisms
• Three year warranty on fabric/cushions/arm pads

Find Similar Products by Tag

bodybilt  

Find Similar Products by Category

Write your own product review

Product Reviews

  1. Very pleased with this chair 5 Star Review

    Posted by on 15th Jan 2014

    This is a great executive chair. It's a bit bigger than most chairs I've sat in, particularly the backrest, but I guess that's why the call it a High Back. The backrest is very comfortable though and provides wonderful support throughout the day. And with all the adjustable components, I was able to get my chair exactly how I want it and it fits me great. The air lumbar works well too. I think because of the air bladder, it has the right amount of "give" in it - I've sat in other chairs where the lumbar support was too firm for my back. Overall, I'd definitely recommend this product. I bet it can be customized to fit just about anyone.


  2. The best chair I've had 5 Star Review

    Posted by on 14th Aug 2013

    I purchased the BodyBilt 3507 model and this is the most comfortable chair I've ever sat in. The chair is highly customizable, and pretty much every component on the chair can be adjusted. As recommended on the website, I opted for the Comfortek Premium Fabric and happy I did - it's soft and very comfortable. I definitely recommend the Comfortek since the fabric is really what your body comes in contact with the most so it's probably one of the most important choices when choosing your chair. It's soft so it doesn't scratch your clothing (I've had some harsher fabrics in the past which made the seat of my pants fade over time). The chair seems very well built and sturdy too. It's a little heavier than other chairs, but that to me just means it's well built with quality. Highly recommend!